Suggested Dev Environment

Prerequisites:

One of:
- Getting started on Windows
- Getting started on Linux / WSL2.
One of:
- Building OpenVMM
- Building OpenHCL

This page is for those interested in actively iterating on OpenVMM or OpenHCL.

Setting up VSCode

These instructions assume you're using VSCode.

If you're using a different development environment, we nonetheless suggest reading through this section, so you can enable similar settings in whatever editor / IDE you happen to be using.

[WSL2] Connecting to WSL using VSCode

When using Visual Studio Code with WSL, be sure to use the WSL extension instead of accessing your files using the \\wsl.localhost share (the repo should be cloned in the WSL filesystem, as mentioned in the WSL getting started guide). This will ensure that all VSCode extensions and features to work properly.

Once the extension is installed, click the blue arrows in the bottom left corner and select "Connect to WSL". Then open the folder you cloned the repository into. More information is available here.

Configuring `rust-analyzer`

rust-analyzer provides IDE-like functionality when writing Rust code (e.g: autocomplete, jump to definition, refactoring, etc...). It is a massive productivity multiplier when working with Rust code, and it would be a very bad idea to work in the OpenVMM repo without having it set up correctly.

Check out the rust-analyzer manual for a comprehensive overview of rust-analyzer's features.

Once installed, we suggest you specify the following additional configuration options in the OpenVMM workspace's .vscode/settings.json file:

{
    "rust-analyzer.linkedProjects": [
        "Cargo.toml",
    ]
}

(Strongly Suggested) Avoiding cache invalidation

To avoid unnecessary re-builds or lock-contention in the build directory between rust-analyzer and manual builds, set the following configuration option to give rust-analyzer a separate target directory:

{
    "rust-analyzer.cargo.targetDir": true,
}

(Strongly Suggested) Disable nested imports

When auto-importing deps, rust-analyzer defaults to nesting imports, which isn't the OpenVMM convention.

This can be changed to one-dep-per-line by specifying the following settings:

{
    "rust-analyzer.imports.granularity.group": "item",
    "rust-analyzer.imports.group.enable": false,
}

Enabling `clippy`

CI will fail if the code is not clippy-clean. Clippy is a linter that helps catch common mistakes and improves the quality of our Rust code.

By default, rust-analyzer will use cargo check to lint code, but it can be configured to use cargo clippy instead:

{
  "rust-analyzer.check.command": "clippy",
}

Enabling Format on Save

CI will fail if code is not formatted with rustfmt.

You can enable the "format on save" option in VSCode to automatically run rustfmt whenever you save a file:

{
    "[rust]": {
        "editor.formatOnSave": true
    },
}

Enhanced "Enter"

rust-analyzer can override the "Enter" key to make it smarter:

"Enter" inside triple-slash comments automatically inserts ///
"Enter" in the middle or after a trailing space in // inserts //
"Enter" inside //! doc comments automatically inserts //!
"Enter" after { indents contents and closing } of single-line block

This action needs to be assigned to shortcut explicitly, which can be done by adding the following line to keybindings.json:

// must be put into keybindings.json, NOT .vscode/settings.json!
{
    "key": "Enter",
    "command": "rust-analyzer.onEnter",
    "when": "editorTextFocus && !suggestWidgetVisible && editorLangId == rust"
}

Running `cargo xtask fmt house-rules` on-save

The OpenVMM project includes a handful of custom "house rule" lints that are external to rustfmt. These are things like checking for the presence of copyright headers, enforcing single-trailing newlines, etc...

These lints are enfoced using cargo xtask fmt house-rules, and can be automatically fixed by passing the --fix flag.

We recommend installing the RunOnSave extension, and configuring it to run these lints as part of your regular development flow.

Set the following configuration in your .vscode/settings.json

{
    "emeraldwalk.runonsave": {
        "commands": [
            {
                "match": ".*",
                "cmd": "cd ${workspaceFolder}"
            },
            {
                "match": ".*",
                "isAsync": true,
                "cmd": "$(cat ./target/xtask-path) fmt house-rules --fix ${file}"
            }
        ]
    },
}

GitHub Pull Request Integration

As the repo is hosted on GitHub, you might find convenient to use the GitHub Pull Request VSCode extension. That allows working through the PR feedback and issues without leaving the comfort of VSCode.

Setting up pre-commit and pre-push hooks

It's never fun having CI reject your changes due to some minor formatting issue, especially when it's super quick to run those formatting checks locally. Running cargo xtask fmt before pushing up your code is quick and easy, and will save you the annoyance of wrestling with formatting check-in gates!

Of course, it's very easy to forget to run cargo xtask fmt after making code changes, but thankfully, you can set up some git hooks that will do this for you automatically!

You can run cargo xtask install-git-hooks --help for more details on what hooks are available and their various configuration options, but for most users, we suggest the following config:

cargo xtask install-git-hooks --pre-push --with-fmt=yes

And you'll be all set!

NOTE: If you're worried about time, the pre-push hook should only takes ~5 seconds to run locally. That's far better than sinking ~20+ mins of CI time!

[WSL2] Cross Compiling from WSL2 to Windows

Setting up cross compilation is very useful, as it allows using the same repo cloned in WSL2 to both develop OpenHCL, as well as launch it via OpenVMM via the WHP backend.

Required Dependencies

Note that this requires some additional dependencies, described below.

Windows deps

Visual Studio build tools must be installed, along with the Windows SDK. This is the same as what's required to build OpenVMM on windows.

WSL deps

The msvc target x86_64-pc-windows-msvc must be installed for the toolchain being used in WSL. This can be added by doing the following:

rustup target add x86_64-pc-windows-msvc

Note that today this is only supported with the external, public toolchain, not msrustup.

Additional build tools must be installed as well. If your distro has LLVM 14 available (Ubuntu 22.04 or newer):

sudo apt install clang-tools-14 lld-14

Otherwise, follow the steps at https://apt.llvm.org/ to install a specific version, by adding the correct apt repos. Note that you must install clang-tools-14 as default clang-14 uses gcc style arguments, where clang-cl-14 uses msvc style arguments. You can use their helper script as well:

wget https://apt.llvm.org/llvm.sh
chmod +x llvm.sh
sudo ./llvm.sh 14
sudo apt install clang-tools-14

Setting up the terminal environment

Source the build_support/setup_windows_cross.sh script from your terminal instance. For example, the following script will do this along with setting a default cargo build target:

#!/bin/bash

# Setup environment and windows cross tooling.

export CARGO_BUILD_TARGET=x86_64-unknown-linux-gnu
cd path/to/openvmm || exit
. build_support/setup_windows_cross.sh
exec "$SHELL"

For developers using shells other than bash, you may need to run the setup_windows_cross.sh script in bash then launch your shell in order to get the correct environment variables.

Editing with vscode

You can have rust-analyzer target Windows, which will allow you to use the same repo for OpenHCL, Linux, and Windows changes, but the vscode remote server must be launched from the terminal window that sourced the setup script. You can do this by closing all vscode windows then opening your workspace with code <path to workspace> in your terminal.

Add the following to your workspace settings for a vscode workspace dedicated to Windows:

"settings": {
    "rust-analyzer.cargo.target": "x86_64-pc-windows-msvc"
}

Running Windows OpenVMM from within WSL

You can build and run the windows version of OpenVMM by overriding the target field of cargo commands, via --target x86_64-pc-windows-msvc. For example, the following command will run OpenVMM with WHP:

cargo run --target x86_64-pc-windows-msvc

You can optionally set cargo aliases for this so that you don't have to type out the full target every time. Add the following to your ~/.cargo/config.toml:

[alias]
winbuild = "build --target x86_64-pc-windows-msvc"
wincheck = "check --target x86_64-pc-windows-msvc"
winclippy = "clippy --target x86_64-pc-windows-msvc"
windoc = "doc --target x86_64-pc-windows-msvc"
winrun = "run --target x86_64-pc-windows-msvc"
wintest = "test --target x86_64-pc-windows-msvc"

You can then run the windows version of OpenVMM by running:

cargo winrun

Speeding up Windows OpenVMM launch

Due to filesystem limitations on WSL, launching OpenVMM directly will be somewhat slow. Instead, you can copy the built binaries to a location on in the Windows filesystem and then launch them via WSL.

Quite a few folks working on the OpenVMM project have hacked together personal helper scripts to automate this process.

TODO: include a sample of such a script here

The OpenVMM Guide